{"product_id":"fermzilla-tri-conical-gen-3-2","title":"FermZilla Tri-Conical Gen 3.2","description":"The ultimate plastic pressurized conical\n\nA best seller for a reason! Tons of features at an incredible cost\n\nCrystal Clear super smooth PET makes fermenting and cleaning super easy\n\n3\" Butterfly valve at bottom makes removing yeast\/trub easy with the 600mL collection jar.\n\nPressurizable (with accessories) for fermentation and closed transfer to your keg\n\nThe Gen 3.2 FermZilla Tri-Conical features a newly designed collection container with top \u0026amp; bottom PCO1881 ports. The collection container has a 3\" T.C. opening and installs on the Conical with a 3\" T.C. butterfly valve. The molded 3\" T.C. ferrule on the tank is a huge improvement over the Gen 2 model eliminating the complicated dump valve design and simplifying the collection container connection. Brew with confidence on the new Tri-Clover FermZilla!\n\nOut of the box, the FermZilla Conical is an amazing fermenter that will immediately step up your game on the cold side of the brewing process. But what we love most about this unit is how easily it is to upgrade as you go adding more functionality and gaining more precise control over your fermentation with each new accessory. Below are some of our favorite add-ons for the FermZilla Tri-Conical Fermenter.\n\nPressure Kit\n\nThe FermZilla is the perfect option for brewers that want all the advantages of a conical fermenter without the price tag of a full blown stainless steel unit. It allows you to dump trub, harvest yeast, and with the addition of the \u003ca href=\"https:\/\/northtexashomebrew.com\/?s=pressure+kit+fermzilla\u0026amp;post_type=product\u0026amp;type_aws=true\"\u003eFermZilla Pressure Kit\u003c\/a\u003e, you can carbonate and serve all in one vessel! The clear PET tank allows you to visually monitor fermentation activity and is pressure rated to 2.4 Bar (34.8 psi), which means you can ferment under pressure, reducing ester and fusel alcohols in your finished beer. This also gives the ability to perform pressure transfers. If you prefer to move your finished beer to a keg or other vessel, you can do so with little to no oxygen exposure.\n\nTri-Clamp Pressure Lid\n\nAdd a 2\" T.C. port to your fermenter by replacing the standard lid with the FermZilla Tri-Clamp Pressure Lid. This will give you an opening to add dry hops or other additions without needing to remove the entire lid, or you can upgrade down the road with a Hop Bong sight glass in order to add CO2 and purge your hop charge of oxygen. PCO1881 threaded ports are still there for \u003ca href=\"https:\/\/northtexashomebrew.com\/?s=ball+lock+cap\u0026amp;post_type=product\u0026amp;type_aws=true\"\u003eBall Lock Caps\u003c\/a\u003e, as well as undrilled ports for an optional \u003ca href=\"https:\/\/northtexashomebrew.com\/product\/fermzilla-thermowell-with-duotight-bulkhead-23-6\/\"\u003eThermowell \u003c\/a\u003eand \u003ca href=\"https:\/\/northtexashomebrew.com\/product\/temp-twister-cooling-coil\/\"\u003eTemp Twister \u003c\/a\u003ecooling coil.\n\nHop Bong Pressure Pack\n\nThe ultimate upgrade kit! The Hop Bong Pressure Pack has all of the parts included with the Pressure Kit and Tri-Clamp Pressure Lid but fully parted out to remove the guess work. If the Tri-Conical is your first FermZilla fermenter, this accessory kit is for you. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops.\n\nFermZilla Gen 3 vs Gen 3.2:\n\n3\" x 3\" T.C. butterfly dump valve\n\n3\" T.C. compatible collection container\n\n600 mL collection container w\/ top \u0026amp; bottom PCO1881 threaded ports\n\nWhat's Included:\n\nFermZilla 27L Tank with 3\" T.C. Bottom Port\n\n3\" T.C. Butterfly Valve\n\n600 mL Collection Container with 3\" T.C. Connection\n\nStainless Steel Stand with Swing Handles\n\nStainless Steel Handle Assembly\n\nTop Lid with PRV (35 psi)\n\n3\" tri-clamp with gaskets\n\n3-Piece Airlock\n\nGraduation Sticker\n\nAdhesive Thermometer\n\nSpare Seals\n\nSpecs:\n\n27 L (7.1 gal) Total Volume\n\nPressure Rated to 2.4 Bar (34.8 psi)\n\nHeight in Stand - 29.5\"\n\nHeight w\/ Airlock - 33.7\"\n\nTank Diameter- 13.9\"\n\nDiameter in Stand - 15.3\"\n\nLid \u0026amp; Collection Container Ports - 28 mm PCO 1881 threads\n\nTemperature Rating:\n\nWhen not under pressure, do not expose to liquids above 131F\n\nWhen under pressure, do not expose to any temperatures above 95F*\n\n*Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95 F and keep the fermenter in an environment that is below 95F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years.\n\nPlease note:?when using the FermZilla under pressure, you must perform a water pressure check to ensure your connections are leak proof. To do this, fill your FermZilla up with water, apply at least 15 psi pressure, and check for leaks around all caps and threads.?\n\nPressure Stress\n\nIf you use the FermZilla to ferment under pressure, or you use CO2 to pressure transfer or force carbonate your finished beer, it is very important that you conduct semi-annual inspections of your tank. Even with perfect care, the FermZilla tank may show signs of wear from pressure stress over time. We recommend visually inspecting your tank for stress creases or other signs of wear once or twice a year. A hydro test should be conducted every two years, even if no signs of wear are found. The process is simple:\n\nFill the tank to the brim with water\n\nReplace the Red PRV with a \u003ca href=\"https:\/\/northtexashomebrew.com\/?s=D1072\u0026amp;post_type=product\u0026amp;type_aws=true\"\u003eGreen PRV \u003c\/a\u003erated to 4.5 BAR or higher\n\nPressurize the tank to 4 BAR (58 psi)\n\nCheck for leaks, then replace the Red PRV when finished\n\nIf leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla.\n\nGeneral Care\n\nTaking good care of your FermZilla begins with cleaning and sanitizing the unit before and after use. The tank is made from food-grade PET, which is beautifully clear, but can be sensitive to long soaks in cleaners and acid-based sanitizers. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank.\n\nKegLand Part number: KL25898\n\nNOTE:FermZilla tanks are marked with a manufacturer's expiry date. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available \u003ca href=\"https:\/\/www.morebeer.com\/web_files\/intranet.morebeer.com\/files\/FermZilla%20Hydro%20Test%20Instruction%20Manual.pdf\"\u003ehere\u003c\/a\u003e. You will also need the \u003ca href=\"https:\/\/northtexashomebrew.com\/?s=D1072\u0026amp;post_type=product\u0026amp;type_aws=true\"\u003eD1072 Green PRV \u003c\/a\u003eto perform the test. If you do not plan to pressurize the fermenter, the test is not necessary.\n\nItem # FE113\n\nWeight 11 LBS","brand":"Brewmaster","offers":[{"title":"7.1 G","offer_id":47280913809596,"sku":"fe1130","price":169.99,"currency_code":"USD","in_stock":true},{"title":"13.2 gal","offer_id":47280913842364,"sku":"fe114","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/7370\/6172\/files\/27l-fermzilla-easygrip.webp?v=1786816574","url":"https:\/\/nthbs.com\/products\/fermzilla-tri-conical-gen-3-2","provider":"North Texas Homebrew Supply","version":"1.0","type":"link"}